logo
 
 

Specification


    STRUCTURE R.C.C.Frame Structure.
    WALL 15cm or 10cm or 11.50cm thick as per architecture drawings.
    FLOOR HEIGHT 3.0 m floor to floor.
    INTERNAL PLASTER Funty Finish.
    EXTERNAL PLASTER Funty Finish with pointing on front portion.
    FLOORING Full virtrified tiles in hall and ceramic tiles all rooms dado 42" to kitchen otta and washbasi. Full heigh, tiles in bath and toilet.
    KITCHEN OTTA Green marble top with S.S. Sink.
    LOFT One loft 0.45 m shall be provided in kitchen.
    WINDOWS  Aluminium windows with M.S. grill
    DOORS Main door shall have teak wooden frame while other rooms and bath room frame will be in C.C. framewith flush doors of good quality.
    ELECTRICAL Each room shall have two light points, one fan point and one plug point. There shall be one light point in bath rooms and toilets, Power point shall be rpovided in kitchen for fridge and bath room for geyser. All wiring will be concealed in P.V.C. pinpe. All switches will be of ISI mark one bell point. One light point in each balconies and entrance lobby .
    PLUMBING One tap will be provided inkitchen, bath room, washing place, two taps shall be provided in toilet, one flush cock will be provided in bath and toilet.The bathroom will have shower, water mixer and western/indian commode.
    PAINTING The building shall have acrylic based water proof paint externally and O.B.D. paint internally, the doors and windows shall have oil paints.
    PARKING Covered parking on the ground floor and fencing.
 
All trademarks, logos and content provided by their respective owners.
© Copyright 2009, All Rights Reserved.